日本CCS电源PD3-5024-4-SI(A)

This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W.
Connection with the HLV3/HLV2-series Spot Lights is also available.
This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through EIA-485 communications.

Add to Watch List

Product Details Dimensions (mm) Options Cables Downloads

Product Details

Dimensions	W 197 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings)	Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light) Total for 4 channels: 46 W
Number of channels	4 channels
Lighting method	Constant/Strobe lighting
Drive method	24V LIGHT connectors: Constant-voltage system, HLV LIGHT connectors: Constant-current system
Intensity control method	24V LIGHT connectors: PWM control and lighting time control, HLV LIGHT connectors: Variable-current control
PWM frequency	125kHz
Input voltage	100 to 240 VAC (+10% -15%)
Frequency	50/60 Hz
Power consumption	70 VA
Output voltage	24VDC
Output current	Total for 4 channels: 1.91 A
Inrush current	15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start
Intensity control	Manual: 256-step using the front setting switch External: Command input via EIA-485 communication
Error detection display	Digital display on the front-panel; OCP: Overcurrent error, EFN: Fan Stop Error, and EID: ID error (HLV3/HLV2-series Spot Lights only)
Error detection output	Command sent when overcurrent output is detected.
Over current protection	Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. *Do not intentionally short-circuit the positive and negative output terminals.
Output connector	SMP-03V-BC x 8
External control connector	Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: e-CON connector, 3 pins
Conformed standards	CE, UKCA、RoHS
Operating temperature and humidity	Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
Storage temperature and humidity	Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
Cooling method	Forced cooling
Weight	1,200 g
Material	Aluminium, ABS
Accessories	2m long 3-pin power cord with ground terminal x1 Base Brackets x1 set Instruction Guide x1
Program	[Sample Program] Sample programs are available. See the Options tab.

上一篇：日本CCS希希爱视光源TH2-100X100IR1300 下一篇：日本CCS方形照明灯OPF-S100x100R-DF

返回列表