台湾油研比例阀控制器AME-PF-DC

 台湾油研比例阀控制器AME-PF-DC

Power Amplifiers For 10Ω Series Control ValvesAMESeriesNumber-DType of Function-10 -100AME D : DC Input TypePower Supply100200::100 V AC200 V ACCoil Resistanceof ValveDesignNumber-2010 : 10 Ω 20SK1022Series Number-AType of Function-100Polarity of FeedbackVoltage...(–)A :Power Supply100: 100 V ACDesignNumber-111111DC Input-FeedbackTypeSK1022:DC Input Typefor DC PowerSupplySK1015:Polarity of FeedbackVoltage...(+)B : 200: 200/220 V ACName of Valve Model NumbersPilot Relief ValvesRelief ValvesRelieving andReducing Valves10 Ω SeriesFlow Control ValvesFlow Control andRelief ValvesEDG-01EBG-03EBG-06EBG-10ERBG-06ERBG-10EFG-03/06EFCG-03/06(51 Design)EFBG-03EFBG-06EFBG-10AME-D-10- -20Model No.Description SK1022-A- -11 SK1022-B- -11 SK1015-11Type of Fuction DC Input Type DC InputFeedback TypeDC InputFeedback Type DC Input TypeMax. Output CurrentMax. Input VoltageFeedback VoltageInput ImpedanceMax. GainDitherTemperature Drift (Max.)Power Input (Max.)Ambient TemperatureExternal Setting ResistanceMassPower Supply1 A (10 Ω Solenoid)+ 10 V DC10 kΩ1 A / 5 VVariable0.2 mA /°C100 V AC, 200 V AC(50/60 Hz)55 VA0-50°C (32-122°F)1 kΩ2.1 kg (4.6 lbs.)0.9 A (10 Solenoid)+ 10 V DC50 kΩ0.9 A / 5 VFix1 mA /°CΩ22-30 V DC25 VA0-50°C (32-122°F)10 kΩ0.4 kg (.88 lbs.)100 V AC, 200/220 V AC ±10% (50/60 Hz)1 A (10 Solenoid)+ 10 V DC0 to –10V50 kΩ1 A / 0.5 VFix0.2 mA /°CΩ45 VA0-50°C (32-122°F)1 kΩ4.5 kg (9.9 lbs.)1 A (10 Solenoid)+ 10 V DC0 to +10V50 kΩ1 A / 0.5 VFix0.2 mA /°CΩ45 VA0-50°C (32-122°F)1 kΩ4.5 kg (9.9 lbs.)Model Number DesignationUse with 24 V DC since this is for a battery power supply.Applicable to ValveServiceable Range; 100 VAC can be used from 90 to 132 VAC, 200 VAC can be used from 180 to 264 VAC.SpecificationsThese power amplifiers are used to drive the 10Ω series proportionalelectro-hydraulic pressure or flow control valves.InstructionsPower supply for the setting adjuster can be provided from this power amplifier, but for only one.However, please use the variable resistor or potentiometre of which impedance is 1 kΩ (in case of madel SK1015, use10 kΩ) for the setting adjuster.