所有产品分类
日本CCS希希爱视电源PD3-5024-4-PI-PNP(A)电源适配器
发布时间：2024-07-22
日本CCS希希爱视电源PD3-5024-4-PI-PNP(A)电源适配器
PD3-5024-4-PI-PNP(A)
This digital control unit can be used for LED light units with an input voltage of 24 V within a total power consumption of 46 W.
Connection with the HLV3/HLV2 series spot lights is also available.
This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications, external trigger signal communication PNP input model.
Product Details
| Dimensions | W 197 mm x D 82.6 mm x H 120 mm |
|---|---|
| Applicable Light Unit (output ratings) | Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light) Total for 4 channels: 46 W |
| Number of channels | 4 channels |
| Lighting method | Constant/Strobe lighting |
| Drive method | 24V LIGHT connectors: Constant-voltage system, HLV LIGHT connectors: Constant-current system |
| Intensity control method | 24V LIGHT connectors: PWM control and lighting time control, HLV LIGHT connectors: Variable-current control |
| PWM frequency | 125 kHz |
| Input voltage | 100 to 240 VAC (+10% -15%) |
| Frequency | 50/60 Hz |
| Power consumption | 70 VA |
| Output voltage | 24 VDC |
| Output current | Total for 4 channels: 1.91 A |
| Inrush current | 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start |
| Intensity control | Manual: 256-step using the front setting switch External: 8-bit input (B0 to B7), write pulse (BRTWR), and channel selection (CHSEL0 to CHSEL2) |
| Error detection display | Digital display on the front-panel; OCP: Overcurrent error, EFN: Fan Stop Error, and EID: ID error (HLV3/HLV2-series Spot Lights only) |
| Error detection output | NPN transister output to the External control connector pins between 19(OC) and 20(OE); open for normal operation, closed for overcurrent detection. |
| Over current protection | Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. *Do not intentionally short-circuit the positive and negative output terminals. |
| Output connector | SMP-03V-BC x 8 |
| External control connector | Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: MIL connector (MIL-C-83503 compliant), 20 pins |
| Conformed standards | CE, UKCA、RoHS |
| Operating temperature and humidity | Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation) |
| Cooling method | Forced cooling |
| Weight | 1,200 g |
| Material | Aluminium, ABS |
| Accessories | 2m long 3-pin power cord with ground terminal x1 Base Brackets x1 set Instruction Guide x1 |
友情链接Link
